Item Description

A. Specification of 5RPM Substantial Torque DC Motor Equipment 24V 3Nm for Label Printer:

1. Voltage: 24V
2. Speed: 5-562RPM
three. Torque: 1.7-50Kgf.cm
four. Output Electrical power: 1-10W
5. Gearbox Ratio: one:7.2 to 1: 3415
6. Gearbox Diameter: 50.8mm
seven. Gearbox Duration: 26.4-37.7mm
eight. Motor Size: 58mm
nine. Shaft Diameter: 8mm
ten. Shaft Length: Customized
eleven. Common Software: Label Printer, Auto Shutter, Welding Machine, Water Meter IC Card, Grill, Oven, Cleaning Device, Garbage Disposer, Family Appliance, Slot Equipment, Cash Detector, Computerized Actuator, Coffee Equipment, Towel Disposal, Lights, Coin Refund Units, CZPT Pump and others

Notice: The info sheet is only for reference, We can make the motor in accordance to your requirement soon after Evaluation

B. Organization Potential

HangZhou CZPT Co. Ltd is a manufacturer and exporter of different of motors with above ten a long time experience.
Our product ranges incorporate:
one) DC Brush motor: 6-130mm diameter, .01-1000W output power
two) DC Spur Gear Motor: 12-110mm diameter, .1-300W output power
3) DC Planeary Equipment Motor: 10-82mm diameter, .1-100W output power 
four) Brushless DC Motor: 28-110mm, 5-1500W output power 
5) Stepper Motor: NEMA 08 to NEMA forty three, Can with gearbox and lead screw
six) Servo Motor: 42mm to 130mm diameter, fifty-4000w 
seven) AC Gear Motor: 49 to 100mm diameter, 6-140 output power 

1. Creation Line:

2. Tests Gear:

three. Certificates:

4. Consumer Visits:

6. FAQ:

Q: What is your primary goods?
A:We at the moment create Brushed Dc Motors, Brushed Dc equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors and Ac Motors etc. You can verify the technical specs for above motors on our site and you can e-mail us to recommend needed motors per your specification way too.

Q:How to pick a suitable motor?
A:If you have motor pictures or drawings to show us, or you have thorough specs like voltage, speed, torque, motor dimensions, working manner of the motor, required daily life time and sounds degree etc, you should do not be reluctant to permit us know, then we can advocate ideal motor for every your ask for accordingly.

Q: Do you have personalized provider for your common motors?
A:Indeed, we can customize for each your request for the voltage, speed, torque and shaft size/shape. If you need to have extra wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it too.

Q:Do you have individual layout services for motors?
A:Indeed, we would like to design motors individually for our clients, but it could require some CZPT charge and style cost. 

Q:Can I have samples for screening very first?
A:Sure, undoubtedly you can. Soon after confirmed the essential motor specs, we will quotation and give a proforma invoice for samples, once we get the payment, we will get a PASS from our account division to continue samples appropriately.

Q:How do you make positive motor good quality?
A:We have our personal inspection procedures: for incoming components, we have signed sample and drawing to make sure competent incoming resources for creation procedure, we have tour inspection in the process and closing inspection to make positive qualified products ahead of shipping and delivery.

Q:What is your guide time?
A:Generally talking, our regular normal product will want twenty five-30days, a bit for a longer time for tailored goods. But we are extremely adaptable on the guide time, it will depends on the particular orders

Q:What is actually your payment time period?
A:For all our new consumers, we will want forty% deposite, 60% paid out prior to shipment.

Q:When will you reply soon after received my inquiries?
A:We will response in 24 hrs as soon as get your inquires.

Q:How can I trust you to make sure my money is safe?
A:We are certified by the 3rd party SGS and we have exported to more than eighty five international locations up to June.2017. You can verify our status with our present customers in your region (if our customers do not head), or you can get by means of alibaba to get trade assurance from alibaba to make positive your cash is risk-free.

Q:What’s the minimal purchase amount?
A:Our minimal get quantity relies upon on distinct motor models, please e-mail us to examine. Also, we usually do not take personal use motor orders. 

Q:What is actually your transport technique for motors?
A:For samples and deals less than 100kg, we usually recommend categorical shipping For heavy packages, we typically suggest air delivery or sea delivery. But it all relies upon on our customers’ needs.

Q:What certifications do you have?
A:We presently have CE and ROSH certifications.

Q:Can you send out me your price tag checklist?
A:Considering that we have hundreds of various goods, and cost differs for each diverse requirements, we are not CZPT to provide a price listing. But we can quote within 24 hrs after acquired your inquirues to make positive you can get the value in time.

Q:Can I visit your company?
A:Of course, welcome to go to our firm, but please let us know at the very least 2 weeks in advance to support us make confident no other conferences in the course of the working day you pay a visit to us. Thanks!

Weclome contact with us if have any questions about this motor or other items!

###

###

###

###

Types of Bevel Gears

Bevel Gears are used in a number of industries. They are used in wheeled excavators, dredges, conveyor belts, mill actuators, and rail transmissions. A bevel gear’s spiral or angled bevel can make it suitable for confined spaces. It is also used in robotics and vertical supports of rolling mills. You can use bevel gears in food processing processes. For more information on bevel gears, read on.

Spiral bevel gear

Spiral bevel gears are used to transmit power between two shafts in a 90-degree orientation. They have curved or oblique teeth and can be fabricated from various metals. Bestagear is one manufacturer specializing in medium to large spiral bevel gears. They are used in the mining, metallurgical, marine, and oil fields. Spiral bevel gears are usually made from steel, aluminum, or phenolic materials.
Spiral bevel gears have many advantages. Their mesh teeth create a less abrupt force transfer. They are incredibly durable and are designed to last a long time. They are also less expensive than other right-angle gears. They also tend to last longer, because they are manufactured in pairs. The spiral bevel gear also reduces noise and vibration from its counterparts. Therefore, if you are in need of a new gear set, spiral bevel gears are the right choice.
The contact between spiral bevel gear teeth occurs along the surface of the gear tooth. The contact follows the Hertz theory of elastic contact. This principle holds for small significant dimensions of the contact area and small relative radii of curvature of the surfaces. In this case, strains and friction are negligible. A spiral bevel gear is a common example of an inverted helical gear. This gear is commonly used in mining equipment.
Spiral bevel gears also have a backlash-absorbing feature. This feature helps secure the thickness of the oil film on the gear surface. The shaft axis, mounting distance, and angle errors all affect the tooth contact on a spiral bevel gear. Adjusting backlash helps to correct these problems. The tolerances shown above are common for bevel gears. In some cases, manufacturers make slight design changes late in the production process, which minimizes the risk to OEMs.

Straight bevel gear

Straight bevel gears are among the easiest types of gears to manufacture. The earliest method used to manufacture straight bevel gears was to use a planer equipped with an indexing head. However, improvements have been made in manufacturing methods after the introduction of the Revacycle system and the Coniflex. The latest technology allows for even more precise manufacturing. Both of these manufacturing methods are used by CZPT. Here are some examples of straight bevel gear manufacturing.
A straight bevel gear is manufactured using two kinds of bevel surfaces, namely, the Gleason method and the Klingelnberg method. Among the two, the Gleason method is the most common. Unlike other types of gear, the CZPT method is not a universal standard. The Gleason system has higher quality gears, since its adoption of tooth crowning is the most effective way to make gears that tolerate even small assembly errors. It also eliminates the stress concentration in the bevelled edges of the teeth.
The gear’s composition depends on the application. When durability is required, a gear is made of cast iron. The pinion is usually three times harder than the gear, which helps balance wear. Other materials, such as carbon steel, are cheaper, but are less resistant to corrosion. Inertia is another critical factor to consider, since heavier gears are more difficult to reverse and stop. Precision requirements may include the gear pitch and diameter, as well as the pressure angle.
Involute geometry of a straight bevel gear is often computed by varying the surface’s normal to the surface. Involute geometry is computed by incorporating the surface coordinates and the theoretical tooth thickness. Using the CMM, the spherical involute surface can be used to determine tooth contact patterns. This method is useful when a roll tester tooling is unavailable, because it can predict the teeth’ contact pattern.

Hypoid bevel gear

Hypoid bevel gears are an efficient and versatile speed reduction solution. Their compact size, high efficiency, low noise and heat generation, and long life make them a popular choice in the power transmission and motion control industries. The following are some of the benefits of hypoid gearing and why you should use it. Listed below are some of the key misperceptions and false assumptions of this gear type. These assumptions may seem counterintuitive at first, but will help you understand what this gear is all about.
The basic concept of hypoid gears is that they use two non-intersecting shafts. The smaller gear shaft is offset from the larger gear shaft, allowing them to mesh without interference and support each other securely. The resulting torque transfer is improved when compared to conventional gear sets. A hypoid bevel gear is used to drive the rear axle of an automobile. It increases the flexibility of machine design and allows the axes to be freely adjusted.
In the first case, the mesh of the two bodies is obtained by fitting the hyperboloidal cutter to the desired gear. Its geometric properties, orientation, and position determine the desired gear. The latter is used if the desired gear is noise-free or is required to reduce vibrations. A hyperboloidal cutter, on the other hand, meshes with two toothed bodies. It is the most efficient option for modeling hypoid gears with noise concerns.
The main difference between hypoid and spiral bevel gears is that the hypoid bevel gear has a larger diameter than its counterparts. They are usually found in 1:1 and 2:1 applications, but some manufacturers also provide higher ratios. A hypoid gearbox can achieve speeds of three thousand rpm. This makes it the preferred choice in a variety of applications. So, if you’re looking for a gearbox with a high efficiency, this is the gear for you.

Addendum and dedendum angles

The addendum and dedendum angles of a bevel gear are used to describe the shape and depth of the teeth of the gear. Each tooth of the gear has a slightly tapered surface that changes in depth. These angles are defined by their addendum and dedendum distances. Addendum angle is the distance between the top land and the bottom surface of the teeth, while dedendum angle is the distance between the pitch surface and the bottom surface of the teeth.
The pitch angle is the angle formed by the apex point of the gear’s pitch cone with the pitch line of the gear shaft. The dedendum angle, on the other hand, is the depth of the tooth space below the pitch line. Both angles are used to measure the shape of a bevel gear. The addendum and dedendum angles are important for gear design.
The dedendum and addendum angles of a bevel gear are determined by the base contact ratio (Mc) of the two gears. The involute curve is not allowed to extend within the base diameter of the bevel gear. The base diameter is also a critical measurement for the design of a gear. It is possible to reduce the involute curve to match the involute curve, but it must be tangential to the involute curve.
The most common application of a bevel gear is the automotive differential. They are used in many types of vehicles, including cars, trucks, and even construction equipment. They are also used in the marine industry and aviation. Aside from these two common uses, there are many other uses for bevel gears. And they are still growing in popularity. But they’re a valuable part of automotive and industrial gearing systems.

Applications of bevel gears

Bevel gears are used in a variety of applications. They are made of various materials depending on their weight, load, and application. For high-load applications, ferrous metals such as grey cast iron are used. These materials have excellent wear resistance and are inexpensive. For lower-weight applications, steel or non-metals such as plastics are used. Some bevel gear materials are considered noiseless. Here are some of their most common uses.
Straight bevel gears are the easiest to manufacture. The earliest method of manufacturing them was with a planer with an indexing head. Modern manufacturing methods introduced the Revacycle and Coniflex systems. For industrial gear manufacturing, the CZPT uses the Revacycle system. However, there are many types of bevel gears. This guide will help you choose the right material for your next project. These materials can withstand high rotational speeds and are very strong.
Bevel gears are most common in automotive and industrial machinery. They connect the driveshaft to the wheels. Some even have a 45-degree bevel. These gears can be placed on a bevel surface and be tested for their transmission capabilities. They are also used in testing applications to ensure proper motion transmission. They can reduce the speed of straight shafts. Bevel gears can be used in many industries, from marine to aviation.
The simplest type of bevel gear is the miter gear, which has a 1:1 ratio. It is used to change the axis of rotation. The shafts of angular miter bevel gears can intersect at any angle, from 45 degrees to 120 degrees. The teeth on the bevel gear can be straight, spiral, or Zerol. And as with the rack and pinion gears, there are different types of bevel gears.

editor by czh 2022-12-29